HY-700C Plastic Wrap Cutting Machine Multi Function Stretch Film Slitter
The machine is suitable for the slitting of various roll materials
such as BOPP, PET, CPP, CPE, PVC, etc. According to different
needs, the material is trimmed, slitted and so on in the production
Performance and features
The machine uses three-phase asynchronous motor, to maintain smooth
operation of acceleration; (using frequency control)
Automatic meter, alarm and other functions;
Rewinding using A, B expansion shaft structure, loading and
unloading easy operation;
Unwinding using photoelectric automatic correction correction
system, the irregular material can be normal cut
Flat knife slitting waste automatic discharge device
Manual feeding, air shaft (key bar) 3 inches.
First, the technical parameters
1. Width: 700C type
2. Slitting thickness: 20g-300g / m2 (depending on the raw
materials may be)
3. Raw material unwinding the largest diameter: φ300mm
4. Raw material winding the largest diameter: φ450mm
5 cutting the maximum width of raw materials: 700mm
6. Coiling shaft diameter: φ74mm (slip shaft)
7. At the same time the number of reeling shaft: 2 (uniaxial
Correction accuracy: ± 0.5mm
Cutting accuracy: ± 0.5mm
10. Speed: 10-150m / min
11 total power: 4kw
14. Body color: white (other colors are optional)
15. Using automatic optical correction (according to different raw
materials and customer specific requirements may be)
Second, the machine configuration
1. Unwinding part:
Rack using castings structure
Magnetic powder tension control: tension control range 10-200N.M
Tension powder using 5kg controller 1 Taiwan
Wearing material axis using inflatable shaft wear material in the
form of a
Drive guide roller aluminum guide bar, after the dynamic balance
Substrate can be around, parallel adjustment: manual operation
Photoelectric correction system 1 set
Correction accuracy: ± 0.5mm
Correction of the host using 90 synchronous motor drive 1 Taiwan
Photoelectric eye tracking correction 1 only
2. The host part
The frame adopts 120 # high-quality casting structure
45 * steel support
1) Drive and transmission:
Take the initiative to use a combination of motor and speed wheel
The main motor speed motor 1 Taiwan
Inverter with Shenzhen Technology Co., Ltd. (4KW)
Transmission with pulley and sprocket combination of transmission
Guide roller: Aluminum alloy guide roller and balance
Aluminum guide roller specifications: φ70 730mm
2) traction device:
Structure type: Active traction pneumatic compression type
Compression mode using the cylinder control
Compression cylinder specifications: φ50 * 25 2 only
Pressure roller with rubber roller (size: φ90 × 730m) 1
The main roll with rubber roller (size: φ106 × 730m) 1
Drive mode: the main motor drives the main drive shaft, the main
shaft drives the drive roller traction
3) Slitting device:
Flat knife structure
Using a groove roll
Flat knife rack with eight random distribution
3. Winding device
Structure mode: double-inflatable shaft winding (also uniaxial
Adopts the bar type expansion shaft (specification: φ74 × 750m) 2
Transmission: the use of sprocket drive
Unwinding diameter: φ600mm
Compression mode: The cylinder head sleeve structure and the back
pressure shaft device 2
4-row waste device:
Discharge method: hair waste discharge
The main motor using three-phase asynchronous motor
(Specifications: 0.55kw) 1 Taiwan
5 control section: 1 piece
The machine's control system can be broadly divided into host
control, tension control, and other control of three parts.
Host control: main control box.
Tension control: unwinding tension, winding tension, the control of
a wide speed range, regardless of low speed and high speed are
Good performance, winding effect is excellent.
Equipped with electronic meter meter length; alarm parking;
automatic fixed length.
Can be set to cut off the length of cut
6. Facilities: (the user is responsible for)
Power: Three-phase four-wire air switch: voltage 380V 50Hz
1.5KW air compressor
Package and shipping
Q1: How to visit our Factory? (not a trade company)
A: Option 1: Guangzhou Airport→ Wenzhou Airport→ Pick you up
Option 2: Shanghai Airport→ Wenzhou Airport or Rui’an Train
Station→Pick you up
Q2: How does your factory do the quality control?
A: “QUALITY FIRST " We purchase qualified parts, test the machine
every step when manufacturing.
Q3: How about the installation?
A: Option 1, our engineer install the machines for you, also train
your staff until they can run the machine independently.
Option 2, you learn this in our factory.
Q4:Do you have after-sale service?
A: 1 Year Warranty and timeless maintenance service. One service
center in Germany.
Q5: How about the payment term?
A: Payment term:1, T/T 30% , 70% before shipping.
Professional sales staff for you to explain in detail the efficacy
of products and methods of use, and according to the different
circumstances of customers to provide you with such as plant,
layout, design drawings, staff training and other technical
services. Venture budget and advice.
Sale of services:
Professionals and training centers to provide you with
comprehensive technical advice and training, fully understand the
performance characteristics of the product, on-site training
hands-on exercises, so that you not only bought equipment, but also
mastered the technology.
In particular, equipped with a number of excellent, experienced
technical master to track the entire service to answer customers a
variety of difficult problems to be
Seeking, but also visit customers regularly to help customers train
International Sales Center
Address Office: Room 1512,No.255,Lane 658,Guangfulin Road,
Songjiang District,Shanghai, P.R.China
Address factory: Economic development Zone,Ruian City, Zhejiang